Get Full Version of the Exam
http://www.EnsurePass.com/300-175.html
Question No.81
When cabling a Cisco UCS 6200 Series Fabric Interconnect to disjoint Layer 2 networks, which option must be considered?
-
The fabric interconnect must be in switching mode.
-
You must first configure a LAN pin group.
-
Each VLAN is allowed across multiple disjoint uplinks.
-
Each vNIC can communicate to a single disjoint network.
Correct Answer: D
Question No.82
Which two VMware features will not allow an adapter to transition from Cisco VM-FEX standard mode to universal passthrough mode? (Choose two.)
-
VM Snapshot
-
Volume Shadow Copy
-
Storage vMotion
-
HA
-
Resource Reservations
Correct Answer: AC
Question No.83
Which network driver is required on a VMware ESXi 5.0 host for a vNIC to enter Cisco VM- FEX universal passthrough mode?
-
VMXNET3
-
Vlance
-
Flexible
-
E1000e
-
VMXNET5
Correct Answer: A
Question No.84
What are the three main components of the VM-FEX environment? (Choose three.)
-
Red Hat Network Satellite server
-
ESX host with Cisco UCS M81KR VIC
-
ESX host with Cisco UCS M72KR CAN
-
VMware vCenter
-
VMware Update Manager
-
Cisco UCS Manager
-
Cisco VSG
Correct Answer: BDF
Question No.85
Which adapter is capable of supporting VM-FEX?
-
VIC 1280
-
Cisco UCS M61KR-I
-
Cisco UCS M72KR
-
Cisco UCS M51KR-B
Correct Answer: A
Question No.86
Which virtual hardware version is required for a VM to enter the Cisco VM-FEX universal passthrough mode?
-
Version 5
-
Version 6
-
Version 7
-
Version 8
-
Version 9
Correct Answer: D
Question No.87
Which of the following scenarios accurately demonstrate how the Cisco Unified Computing System ensures that a firmware upgrade is minimally disruptive to the data center unified fabric?
-
If an I/O module is upgraded to a version that is incompatible with its fabric interconnect, the fabric interconnect can automatically reactivate the I/O module to a compatible version.
-
If components like server BIOS, HBA, and RAID controller firmware are unsuccessfully updated through direct firmware updates, the update process will fall back to a host firmware package that
is associated with the service profile.
-
If an update of the subordinate fabric interconnect leaves it in a nonusable state, the primary fabric interconnect will automatically be updated to ensure that one fabric interconnect is running the most recent firmware.
-
After Cisco Unified Computing System Manager upgrades the subordinate node, only then is the active management node automatically synchronized.
Correct Answer: A
Question No.88
After staging a VEM file on a VMware ESXi 5.0 host in the /tmp directory, what is the correct command syntax to install the VEM?
-
esxcli software vib install -d /tmp/VEM500-20110825132140-BG-release.zip -maintenance-mode
-
esxcli software vib install -v /tmp/VEM500-20110825132140-BG-release.zip -maintenance-mode
-
esxupdate software vib install -d /tmp/VEM500-20110825132140-BG-release.zip -maintenance- mode
-
esxupdate software vib install -v /tmp/VEM500-20110825132140-BG-release.vib -maintenance- mode
Correct Answer: A
Question No.89
Which two policies can be configured in a port profile for VM-FEX high-performance mode? (Choose two.)
-
QoS policy
-
network control policy
-
adapter policy
-
BIOS policy
-
vNIC connection policy
Correct Answer: AC
Question No.90
What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series server?
-
#39;Shared LOM#39; NIC mode with #39;Active-active#39; NIC redundancy and DHCP enabled
-
#39;Shared LOM#39; NIC mode with #39;Active-standby#39; NIC redundancy and DHCP enabled
-
#39;Dedicated#39; NIC mode with #39;Active-standby#39; NIC redundancy DHCP disabled
-
#39;Dedicated#39; NIC mode with #39;None#39; NIC redundancy and DHCP enabled
-
#39;Cisco Card#39; NIC mode with #39;Active-active#39; NIC redundancy and DHCP enabled
Correct Answer: D
Get Full Version of the Exam
300-175 Dumps
300-175 VCE and PDF